Are Mozo forks any good?

They are both excellent forks for their price range and beyond. If you use a Pro Mozo, be sure to replace the spring/elastomer stack with Speedsprings(I use soft). Over the toughest terrain in the midwest, this fork never bottoms. The steerer tube is easily replaceable(if you change bike frames).

What is the most expensive suspension fork?

Fox 36 Factory GRIP2
Fox 36 Factory GRIP2 The all-singing Fox 36 GRIP2 Factory is the most expensive fork we’ve tested. Fortunately, it’s got performance to match. It’s four-way adjustable damper has high-and low-speed adjustment for both compression and rebound damping.

How do you measure front forks?

Measure from the fork crown race to where the lower pressed race would enter the head tube. Next, measure the upper stack from where the upper pressed race would enter the head tube to the top of the adjusting race. Add any spacers and add the height of the stem. Add all these numbers together.

Does preload affect ride quality?

See all 9 photos Here, spring height’s been adjusted roughly one inch, introducing more preload (top), but since it’s a linear-rate spring, it won’t affect handling or ride quality—just ride height. When preload force is greater than the car’s corner weight, trouble’s bound to happen.

Is suntour a good brand?

The higher-level Suntour forks and shocks are very good. Don’t judge them by the bottom budget forks. I’d actually put them up there with Fox and RS on quality. Move along, nothing to see here.

Why are Fox forks so expensive?

they are expensive because they are great. stiff, durable, and in practice can go years without servicing.

What size forks do I need?

The traditional standard has long been 1 1/8” but some modern bikes feature larger 1.5” head tubes or even tapered versions, where the diameter of the tube at the bottom (1.5”) is larger than at the top (1 1/8”) , so you’ll need a fork with a tapered steerer tube to match.

How do you stiffen Forks?

Just fill the fork tubes up to the rim with sand and then screw the cap back on. That will stiffen them up.

How do I make my fork springs stiffer?

So, there are a couple ways to make a spring stiffer or less stiff. Smaller wire diameter, or more wire in total with a tighter wind will make the spring softer. The longer the wire the bigger the wrench youre giving to what ever it is that is going to compress the spring.

Is the RST Mozo XL a good fork?

The RST MOZO XL 4.5 is a sweet fork, I didn’t think so at first, but it beats the hell out of a judy and day on performance. I have it on my STS2 and it looks great (the yellow thing is getting out of hand!) but it really screwed up the handling! The angle the fork puts the bike at is good for DH, but steers a little slow in tight single tracks.

Is the Mozo Fatman hydraulic the best suspension fork?

The Mozo Fatman Hydraulic features a straight steerer designed to replace a stock suspension fork on our All Terrain series of bikes. This is the best suspension fork out there. I have been riding my MOZO XL 4.5 for 3 months and have experienced NO problems.

Is my Mozo XL becoming stiff?

I have been riding my MOZO XL 4.5 for 3 months and have experienced NO problems. I have been riding in all conditions including muck and water (El Nino has caused an early breakup for Alaska). As for Mark from California, your fork is becoming stiff because, 1. elastonmers on ALL forks are temprature sensative.

What are the features of a box mountain bike fork?

Brand New in Box Mountain bike fork for 26″ wheels with 1 1/8″ threadless steerer tube. Features: Long uncut 9.5″ steerer tube 1 1/8″ threadless will accommodate almost all frames. It has brake bosses and disc brake tabs, so it works with V brakes and disc brakes. Preload adjustable ( there is a dial on top of the fork ) Aluminum lowers and crown.