Does Tractor Supply have lawn mower blades

Zero-turn lawn mower blades cost between $12 and $31, depending on the type and brand. Riding lawn mower blades cost between $10 and $40.

How much does a new lawn mower blade cost?

Zero-turn lawn mower blades cost between $12 and $31, depending on the type and brand. Riding lawn mower blades cost between $10 and $40.

How do I find out my lawn mower blade size?

LENGTH: Length is measured diagonally from one tip of the blade to the opposite tip of the blade. It is important to measure the length correctly. Measuring from end to end will result in the wrong blade length. All length measurements must be made diagonally.

Can you put any blade on a lawn mower?

In short, the answer is yes. However, you must ensure that the centre hole and length of the blade is the same as the one you are replacing.

Are all lawnmower blades the same size?

Lawn mower blades are mower specific and not universal. … You can also replace a certain manufacturer’s blades with another manufacturer’s blade, provided that they match up with your mower in length, thickness, width, hole numbers, hole shapes, and hole sizes.

Are lawn mower blades the same?

When you need to replace your lawn mower blades, you may wonder if they are universal. The fact is that they are not. Different lawn mowers use different blades, and you will need to know the make and model of your mower to know what type of blade you need.

What lawn mower blades do I need?

High-lift Blade. High-lift blades, also known as a basic blade, regular blade, or a 2-in-1 blade, are perfect for mowers with a bagger. …
Low-lift Blade. A low-lift blade is a popular choice for those with dry, shorter grasses or those with sandy soils. …
Mulching Blade.

What size blades do I need for a 42 inch deck?

2 blades are required for a 42″ cut deck. This blade replaces Poulan/Craftsman 134149 and 532134149; Husqvarna 532 13 41-49. Blade measures 21″ long by 2-1/4″ wide with a 5 point star center hole.

Are all 21 mower blades the same?

So, are lawn mower blades universal? Lawnmower blades are not universal, they are mower specific. A mower blade must be an exact fit and torqued to the manufacturer’s specification.

How much space do you need between mower blades?

Blades don’t physically overlap. If you put them tip to tip there should be 1/8 inch gap. You can set them 90 degrees at first but it won’t last long.

Article first time published on

How many blades does a riding lawn mower have?

How many blades are there on a rider mower? It depends on the model. Most riding mowers use a single long blade, but larger mowers sometimes use a pair of blades that may be anywhere from 6-32 inches (15-81 cm) in length.

How many blades does a mower have?

The main parts of a cylinder or reel mower are: Blade reel/cylinder: Consists of numerous (3 to 7) helical blades that are attached to a rotating shaft.

What size blades do I need for a 54 deck?

AYP Gator Mulching 3-in-1 Blade fits 54″ Cut Decks, needs three blades. Size: Length: 18-1/2″, Center Hole: 5/8″Star, Width-thickness: 250-187. Replaces # 187254. {Blades are sold individually} If you purchase 6 of these blades you get FREE SHIPPING.

Does a new lawn mower blade need to be sharpened?

As mentioned above, brand new lawn mower blades do not need to be sharpened because they are always sharpened during manufacturing. … However, lawn mower blades do generally need to be sharpened at the beginning of each new season.

How often should you replace lawn mower blades?

A good rule of thumb for the average homeowner is to replace your mower blades annually. You may also think about replacing them if they become damaged. Dig up that product manual if you want a more clear-cut answer. Always make sure to take protective measures whenever sharpening your mower blades at home.

What is the difference between a mulching blade and a regular blade?

Standard blades, sometimes referred to as 2-in-1 blades, are designed to cut grass and then either discharge or bag the clippings. … Mulching blades, also known as 3-in-1 blades, can be used to bag, discharge, or mulch grass clippings. Mulching blades feature more curves and an increased cutting edge.

Which mower blade is best?

Toro 22” Recycler Mower Replacement Blade 59534P (only For Toro) …
Maxpower 561739 2-Blade Set For A 46” Cut Craftsman (only For Craftsman, Husqvarna, And Poulan) …
Honda 72531-VH7-000 + 72511-VH7-000 Lawn Mower Blade Set (Only for Honda)

Are lawn mower blades standard size?

Mower blades can be 1 1/2″ to 4 1/4″ in width, and are available in thicknesses ranging from about 1/10″ to almost 1/3″. [Back to top] Number of Holes Lawn mower blades will have either one or three holes in them for where they attach to the machine.

How sharp should mower blades be?

Mower blades should be aggressively sharp, but not as sharp as a razor’s edge. You should be able to touch the blade with your hand without getting cut. Contrary to popular belief, a lawn mower blade with a razor sharp edge will not cut grass better.

What is the difference between high lift and mulching blades?

Standard blades are also referred to as “2-in-1” (discharging & bagging) or “high-lift” blades (because they are designed to create a higher-lifting airflow). Mulching blades generally have a more curved style surface and frequently include extra cutting surfaces along the blade edges.

How do I know if I need a new mower blade?

It’s more than two years old. As a general rule of thumb, a mower blade should be replaced every one to two years for safety and performance purposes.
It’s bent. …
It’s dull and you’ve already sharpened it twice. …
There are dents, gouges and/or pieces missing.

What size blades does a Troy Bilt Bronco take?

Length: 21-1/4″ Center Hole: 6 pt. star. Width: 2-1/2″

Where is the model number on a Lawnboy mower?

You can find the model and serial number on the top of the mower and near the left rear tire.

What height should a lawn mower be set at?

The top setting for most mowers gives a cutting height between 3.25 and 4 inches. This is best for your lawn, but at a setting of 4 inches you may sometimes see some “laying-over” of turf blades that some people find undesirable. For this reason, some people prefer to mow at 3 or 3.5 inches.

How do you tell what year a lawn mower is?

By locating the serial number tag on your machine, you can easily determine your mower’s age. If you have the owner’s manual for your mower, you can also check the date printed on the inside of the manual. This date should be one year after the mower’s manufacture date.

Do lawn mower blades need to be aligned?

Aligning the Blades The problem could be related to the tire pressure, which can throw off the weight of the mower deck. Some mower manuals, like this one from John Deere, make a point of saying that mower blades need to be aligned perpendicular to one another.

How much do you overlap when mowing?

Be sure to mow in a straight line, whenever possible. And overlap your mowing path from 2-4 inches to avoid strips of uncut grass.

How do you overlap a riding lawn mower?

Overlap Mistakes Overlap mowing rows by several inches, placing the mower’s current tire path inside the previous row’s tire marks. Also, the blades don’t reach to the very edge of the mowing deck. So overlapping every row by a few to several inches is necessary.

How do you sharpen a lawn mower blade without removing it?

Collect the required tools.
Seal the gas tank. …
Tilt the mower and place the wooden block under it on the other side to give it support. …
Clean the blade with water and a steel brush.
Use the angle grinder or flat-file to sharpen the cutting edge slowly.
Lower the mower.