How do I print a configuration page on a HP LaserJet P2015?

How do I print a configuration page on a HP LaserJet P2015?

Print network configuration, check for valid DHCP IP address….Open browser and enter printer’s IP address in URL field.

1. Select Network Settings tab.
2. Select Manual IP configuration.
3. Enter fixed IP provided by Network Services.
4. Save, then restart printer.

How do I print a configuration page on my HP printer?

From the Home screen on the printer control panel, swipe right to navigate, and then touch Reports. From the Reports menu, touch Configuration/Status Pages. Select the Configuration Page item, and then touch the Print button to print the Configuration pages.

How do I reset my HP LaserJet P2015?

Press and hold the GO button on the control panel of the printer. Turn on the printer and continue to hold the GO button for at least 50 seconds. During this process the Attention, Ready and Go lights turns on together. Then the Attention and Ready lights turns off, leaving just the GO light illuminated.

What do the lights mean on HP LaserJet P2015?

1. Jam light: Indicates that there is a jam in the printer. 2. Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer, the Toner light blinks.

How do I print a configuration page on a HP LaserJet p2035n?

To print a Configuration page, press and hold the Go button for 5 seconds while the device Ready light is on and no other jobs are printing.

How do I print my own test page?

1. Click on the Windows Start Button.
2. Select Control Panel.
3. Select Devices and Printers.
4. Right click on the printer and select Printer Properties.
5. Click Print a Test Page.
6. After the Test Page has printed click OK.

How do I fix the paper jam on my HP LaserJet p2015?

Unplug the power cord when the printer is on and leave it unplugged for 10 Seconds. Turn the printer back on. If the light is still on then there may be a paper jam sensor that has stuck paper in it.

How do I reset my HP m1136 printer?

To restore the product to the factory-default settings, follow these steps.

1. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
2. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
3. Release the Resume button.

How do you know which way to put the paper in the printer?

Put the side to be printed on face up with the leading edge (top) of the paper in first. To print on the second side, put the paper face down, with the leading edge (top) of the paper in first. If letterhead paper is used, put it in with the heading face down and in first.

How do I print a test page on HP P2035?

To print the self test/device configuration page from a P2035, hold down the Go button (the one with the green icon on it) for about five seconds or so, then release it. The config page will begin printing out.