How much does a hardtop for a S2000 cost?

The OEM hardtop is approximately $2,500.

Is there a hard top S2000?

Re: Does the S2000 come with a hard top? ( no. You have to purchase it separately.

How much does it cost to replace hard top?

In the case of a DIY application, you’ll spend roughly $300 in parts to get the job done. A professional will likely charge about $1,000 to perform this service, depending on your vehicle’s make and model and whether or not you have a soft-top or hardtop.

What’s the difference between AP1 and AP2 S2000?

Honda put a larger engine, a 2.2-liter engine in the S2000 AP2 that resulted in increased torque but decreased horsepower. The AP1 Honda S2000 came with a redline of 8800 rpm which was great for revving and accelerating the car, while the AP2 decreased that redline to 8200 rpm.

What Motor came in the S2000?

Honda F20C engine
Honda F20C engine. The F20C and F22C1 were inline-4 engines produced by Honda for use in the Honda S2000. They are one of the few Honda 4-cylinder automobile engines that are designed to sit longitudinally for rear wheel drive.

How often does a convertible top need to be replaced?

Tops generally last 10-12 years depending on care, storage, maintenance, and amount of use. That being said, we have seen tops that are 15 years old that still look good so there are many factors.

Can you change a convertible to a hardtop?

Yes, you buy a hardtop. Simple really. Obviously you need body work people that really know what they’re doing, but it can be done. You would have to find the exact make and model, remove the convertible mechanism, cut the top off the donor car and weld the coupe top onto the convertible.

What does AP1 stand for?

AP1

Acronym	Definition
AP1	Activating Protein-1
AP1	Acid Phosphatase 1

How long do S2000 engines last?

When well cared for, a Honda S2000 engine can last well into the 200,000-mile range. There are a few examples of S2000s with over 300,000 miles, as well.

Does the S2000 have VTEC?

The S2000 was introduced in 1999 for the 2000 model year and was given the chassis designation of “AP1”. It features a front mid-engine, rear-wheel-drive layout with power delivered by a 1,997 cc (122 cu in) inline four-cylinder DOHC-VTEC engine.

Is it hard to install a hardtop on an S2K?

Installing a hardtop on an S2K is a little more involved than many believe it to be, but the results are well worth it. A hardtop is often one of the top items on every S2000 owner’s wish list, but suffice it to say that hardtop installation has caught out a number of unsuspecting installers.

How do I prepare my car for hardtop installation?

>>Join the conversation on the install of the hardtop right here in S2ki Forum! To prepare the car for hardtop installation, remove the door sills, roll bar lower trim pieces, and rear side trim pieces. This is best accomplished by moving the seats as far forward as possible.

How long does it take to install a hardtop?

The internet has a way of blowing problems way out of proportion, so it is likely you have heard horror stories of poor fitment, loud wind noises, and water leaks as a result of installing a hardtop. Fortunately, installing a hardtop is typically a straightforward process that can be done at home in a few hours time.