What is the satellite for Airtel DTH?
David Craig
Updated on March 18, 2026
What is the satellite for Airtel DTH?
The Airtel Digital TV Satellite Name Currently, Airtel Digital TV is using 12 SES 7 Ku transponders of the SES-7 satellite to transmit SD and HD channels using MPEG4 compression. SES-7 is otherwise known as ProtoStar-2 / Indostar-2.
What is Airtel DTH satellite frequency?
This can help the dealers and distributors of Airtel Digital TV. All they need is to feed these frequencies to their Satellite meters….Airtel Digital TV Frequency List Orissa Channels.
| Satellite | 108.2°E – SES 7 |
|---|---|
| Airtel DTH Frequency | 11491 H |
| Airtel DTH Channel Name | Prarthana TV |
| SID | 9605 |
| VPID | 1401 |
What to do if Airtel DTH is showing no signal?
Airtel dish tv connection encountered bad connection returned with error code B001 No signal. Solution: This could be due to bad connection or bad weather condition at your end or at broadcast center. So wait a minutes, power off your settop box and turn on. Try changing channels and see.
Which satellite is used for DTH in India?
Doordarshan is a major user of INSAT satellites for providing television services over the country. At present, 33 Doordarshan TV channels are operating through C-band transponders of INSAT-3A, INSAT-3C, and INSAT-4B.
How do I set my satellite dish signal?
To set azimuth:
- Use a compass to find the correct angle and move the plumb mast (the pole on which the dish is mounted) until the dish is pointing at that angle.
- Check your signal strength: anything over 40 is a good signal.
- Tighten all hardware.
How do I use a satellite signal finder?
Here’s a step by step guide on how to tune a satellite using your satellite finder:
- Step 1: Connect the dish to your satellite finder.
- Step 2: Connect a coaxial cable from the satellite receiver to the coaxial port of the satellite meter.
- Step 3: Power satellite receiver.
What is the Satellite of free Dish?
Satellite in use: INSAT series Geostationary Satellite INSAT-4B from ISRO is being used to provide the services of DD Free Dish in Ku-Band.
How can I check my Airtel signal strength?
Go to the Settings app > About phone > Status > SIM status > Signal Strength. You will see numbers expressed in dBm (decibel milliwatts).
What satellite does dish use?
DISH Network satellites
| Satellite | Location (degrees west) | Type |
|---|---|---|
| EchoStar I | 77 | Lockheed Martin Astro Space Series 7000 (AS-7000) |
| EchoStar II | 148 | Ariane 4 |
| EchoStar III | 61.5 | Lockheed Martin Missiles and Space A2100AX |
| EchoStar IV | 77 | Lockheed Martin Missiles and Space A2100AX |
How do I test my satellite signal?
How to Test Satellite TV Signal Strength
- Ensure the satellite dish is connected to the included satellite receiver box.
- Connect the satellite receiver box to your television.
- Ensure that both the satellite receiver and television are powered on.
- Select the “Signal Meter Screen” option from the receiver menu.
How do I adjust my satellite dish signal?
To adjust the elevation of your satellite dish:
- Loosen the elevation bolts on either side of the back of your satellite dish, while supporting your satellite dish, so that it is still movable.
- Lift your satellite dish vertically, while monitoring the broadcast signal on the signal meter on the Dish Pointing menu.
What is LNB frequency for free dish?
DD Free Dish
| S.No. | Transponder Frequency (MHz) | LNB Frequency (MHz) |
|---|---|---|
| 1. | 10990 | 09750 |
| 2. | 11070 | 09750 |
| 3. | 11150 | 09750 |
| 4. | 11570 | 10600 |
